Furuno FAR-3320SW Installation Manual page 17

1.1.2 How to assemble, mount the antenna unit for FAR-3320W,
FAR-3220W-BB
How to assemble the antenna unit
The antenna unit consists of the antenna radiator and the antenna unit chassis, and
they are packed separately. Fasten the antenna radiator to the antenna unit chassis
as follows:
1. Remove the protective waveguide cap and the gasket beneath the waveguide cap
from the waveguide on the radiator bracket.
2. Coat the hatched area shown below with the supplied marine sealant.
3. Coat the threads of six hex bolts (M8×50, supplied) with the supplied marine seal-
ant. Set the radiator to the radiator bracket.
Remove this cap and the RJ
gasket beneath it BEFORE
fastening the radiator.
Radiator
bracket
Do not apply the sealant to these locations.
Radiator
bracket
FRONT
1. INSTALLATION
RJ gasket
Marine
sealant
REAR
1-3