Furuno FAR-3320SW Installation Manual page 4

SAFETY INSTRUCTIONS
WARNING
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
ELECTRICAL
Only qualified personnel are
SHOCK
allowed to work inside the
HAZARD
equipment.
Construct a suitable service
platform from which to install the
antenna unit.
Serious injury or death can result if
someone falls from the radar antenna
mast.
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury
can result if the power is left on or is
applied while the equipment is being
installed.
Be sure that the power supply is
compatible with the voltage rating
of the equipment.
Connection of an incorrect power
supply can cause fire or damage the
equipment.
Use only the specified power
cable.
Fire or damage to the equipment can
result if a different cable is used.
Do not install the monitor unit,
processor unit, transceiver unit,
power supply unit or control unit
in a dusty environment, or one
where the units may get wet from
rain or water splash.
Dust or water in the units can result in
fire, electrical shock, or damage to
the equipment.
Attach protective earth securely to
the ship's body.
The protective earth (grounding) is
required for the AC power supply to
prevent electrical shock.
ii
CAUTION
Observe the following compass safe
distances to prevent deviation of a mag-
netic compass:
Standard
compass
Antenna Unit
1.90 m
(FAR-3320W)
Antenna Unit
1.55 m
(FAR-3330SW)
Processor Unit
2.40 m
(EC-3000)
Monitor Unit
0.85 m
(MU-231)
Radar Control
0.30 m
Unit (RCU-025)
Trackball Control
0.30 m
Unit (RCU-026)
Intelligent HUB
1.20 m
(HUB-3000)
Sensor Adapter
2.05 m
(MC-3000S)
Sensor Adapter
0.75 m
(MC-3010A0)
Sensor Adapter
1.05 m
(MC-3020D)
Sensor Adapter
0.90 m
(MC-3030D)
Switching HUB
1.00 m
(HUB-100)
Power Supply
2.20 m
Unit (PSU-014/
PSU-015)
Transceiver Unit
2.00 m
(RTR-108)
Transceiver Unit
4.50 m
(RTR-109)
Junction Box
1.10 m
(RJB-001)
Note: For more information, please refer to IMO
SN/Circ.271 "Guidelines for the installa-
tion of shipborne radar equipment."
Steering
compass
1.20 m
0.95 m
1.55 m
0.55 m
0.30 m
0.30 m
0.75 m
1.35 m
0.50 m
0.70 m
0.60 m
0.60 m
1.40 m
1.25 m
2.90 m
0.70 m