Cruise Control Indicator Light; Cruise Control Set Indicator Light - Subaru 2007 B9 Tribeca Owner's Manual

7-34
Starting and operating
cruise control temporarily.
2. When the speed decreases to the de-
sired speed, press the control lever down-
ward in the "SET/COAST" direction once.
Now the desired speed is set and the ve-
hicle will keep running at that speed with-
out depressing the accelerator pedal.

Cruise control indicator light

The cruise control indicator light comes on
when the ignition switch is turned to the
"ON" position and goes out after approxi-
mately three seconds.
The light comes on when the "CRUISE"
main switch is pressed.
If you move the cruise control lever while
turning the ignition switch "ON", the cruise
control function is deactivated and the
"CRUISE" indicator light flashes. To reac-
tivate the cruise control function, turn the
ignition switch back to the "ACC" or
"LOCK" position, and then turn it again to
the "ON" position.
Cruise control set indicator
light
700322
The cruise control set indicator light
comes on when the ignition switch is
turned to the "ON" position and goes out
after approximately three seconds.
The light comes on when vehicle speed
has been set.
700323