When You Do Not Tow A Trailer - Subaru 2007 B9 Tribeca Owner's Manual

8-16
Driving tips
Do not connect safety chains to part
of the vehicle other than the safety
chain hooks.
800209
Hitch harness connector
8. Connect the hitch wire harness's black
four-pin wire connector to the towing trail-
er's wire harness.
9. Confirm proper function of the hitch
wire harness by individually activating the
brake, right turn signal, left turn signal,
stop, and parking lights on the trailer.
NOTE
Always disconnect the trailer wire har-
ness before launching or retrieving a
watercraft.

When you do not tow a trailer

Remove the ball mount from the hitch
receiver tube and insert the receiver cover
onto the hitch receiver tube.
Place the dust cap over the four-pin
connector of the hitch wire harness to pro-
tect against possible damage.
Occasionally lubricate terminals of the
four-pin connector using the terminal
grease.
800210