Illumination Brightness Control; Parking Light Switch - Subaru 2007 B9 Tribeca Owner's Manual

3-28
Instruments and controls
Illumination brightness con-
trol
When the light switch is in the "OFF" posi-
tion, you can adjust the brightness of the
instrument panel illumination for better
visibility.
The brightness of audio, air conditioner,
multi-function display (if equipped) and in-
strument panel illumination automatically
dims when the light switch is in the
" " or " " position. You can ad-
just brightness of the illumination for better
visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
When the control dial is turned fully up-
ward, the illumination brightness be-
comes the maximum and the automatic
dimming function does not work at all.
300510

Parking light switch

The parking light switch operates regard-
less of the ignition switch position.
By pushing the front end of this switch, fol-
lowing lights will come on.
– Parking lights
– Front side marker lights
– Tail lights
– License plate lights
To turn off, push the rear end of the park-
ing light switch.
Avoid leaving these lights on for a long
time because that will run down the bat-
tery.
300511