Outside Mirrors - Subaru 2007 B9 Tribeca Owner's Manual

3-36
Instruments and controls
Compass zone adjustment
1. The zone setting is factory preset to
Zone 8. Refer to the "Compass calibration
zone" map attached to the end of this
manual to verify that the compass zone
setting is correct for your geographical lo-
cation.
2. Press and hold the right button for 3
seconds then release, and the word
"ZONE" will briefly appear and then the
zone number will be displayed.
3. Press the right-hand button repeatedly
to cycle the display through all possible
zone settings. Stop cycling when the cor-
rect zone setting for your location is dis-
played.
4. Releasing the button for 3 seconds will
exit the zone setting mode.

Outside mirrors

Convex mirror (Passenger side)
Objects look smaller in a convex
mirror and farther away than when
viewed in a flat mirror. Do not use
the convex mirror to judge the dis-
tance of vehicles behind you when
changing lanes. Use the inside mir-
ror (or glance backwards) to deter-
mine the actual size and distance of
objects that you view in convex mir-
ror.
Remote control mirror switch
The remote control mirrors operate only
when the ignition switch is in the "ON" or
"ACC" position.
1. Turn the knob to the "L" side to adjust
the left-hand mirror or to the "R" side to ad-
just the right-hand mirror.
2. Move the knob in the direction you
want to move the mirror.
3. Return the knob to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manual-
ly.
Outside mirror defogger
The outside mirror defogger shares the
button with rear window defogger.
The outside mirror defogger operates only
300519
when the ignition switch is in the "ON" po-
sition.
300522