Subaru 2007 B9 Tribeca Owner's Manual page 197

5-24
again to reselect the random mode.
Random playback will be cancelled if
you perform any of the following steps:
Press the "RPT" button
Press the "SCAN" button
Press the " " button
Select the radio mode
Press the "RSE AUX" button
Press the " " or "
the SEEK FLDR button
Turn off the power of the audio
equipment.
Turn the ignition switch to the
"OFF" position.
SCAN
The scan mode lets you listen to the first
10 seconds of each track/file (track) in
succession. Press the "SCAN" button (7)
to start scanning upward beginning with
the track/file (track) following the currently
selected one. When all tracks/files (tracks)
in the disc/folder have been scanned, nor-
mal playback will be resumed. To cancel
the scan mode, press the button again.
NOTE
The scan mode will be cancelled if you
perform any of the following steps:
Press the "RPT" button
Press the "RDM" button
Press the " " or "
TUNE TRACK button
Press the "
SEEK FLDR button (MP3 disc)
Press the "
Press the disc select button
Select the radio mode
Press the "RSE AUX" button
Turn off the power of the audio
equipment.
" side of Turn the ignition switch to the "OFF"
position.
Display selection (MP3 disc)
If you press the "AUDIO" button (3) during
playback, the indication will change to the
next one in the following sequence.
File title
Folder title
Page (track/folder title) scroll (MP3
disc)
If, having pressed the "AUDIO" button (3)
to select track title or folder title display,
you press the "AUDIO" button again for
less than 0.5 second, the title will be
scrolled so you can see all of it. You will
see eight characters at a time.
NOTE
The display is designed to show titles
" side of the
for up to three pages (64 characters in
" or " " side of the total).
" button
Press the "
button (4) briefly to select the next folder.
Pressing the "
the first time makes the player go back to
the beginning of the currently selected file;
pressing it a second time makes it go back
to the previously selected file.
NOTE
Only MP3 folders are recognized when
an attempt to select the next or previ-
ous folder is made. If no appropriate
folder exists on the disc, pressing the
"
Time
button has no effect.
Of the discs loaded, you can select and re-
move only one disc.
1. Use the disc select button (9) to select
the disc to be ejected.
2. Briefly press the "
selected disc will be ejected. The disc
number indicator will flash at this time.
When you remove the ejected disc, the
disc number indicator will go off.
To remove more discs in succession, re-
peat Steps 1 and 2.
Folder selection (MP3 disc)
" side of the SEEK FLDR
" side of the same button
" or " " side of the SEEK FLDR
How to unload CDs from the player
Ejecting a CD from the player
" button (8). The