Key Reminder Chime; Ignition Switch Light; Hazard Warning Flasher; Meters And Gauges - Subaru 2007 B9 Tribeca Owner's Manual

Key reminder chime

The reminder chime sounds when the
driver's door opens and the key is in the
"LOCK" or "ACC" positions. The chime
stops when the key is removed from the
ignition switch.

Ignition switch light

For easy access to the ignition switch in
the dark, the ignition switch light comes on
when the driver's door is opened. The light
remains on for a several seconds and
gradually goes out after the driver's door
is closed.

Hazard warning flasher

The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
push the hazard warning button on the in-
strument panel. To turn off the flasher,
push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
Instruments and controls

Meters and gauges

NOTE
Liquid-crystal displays are used in
some of the meters and gauges in the
combination meter. You will find their
indications hard to see if you wear po-
larized glasses.
Combination meter illumina-
tion
When the ignition switch is turned to the
"ON" position, the various parts of the
300504
combination meter are illuminated in the
following sequence:
1. Warning lights, indicator lights, meter
rims, meter needles, odometer, trip meter,
and gauge back lights illuminate.
2. Meter needles and gauges each show
MAX reading.
3. Meter needles and gauges each show
MIN reading.
4. Meter and gauge dials illuminate.
5. Regular illumination (for driving) be-
gins.
3-5
– CONTINUED –