Replacing Lost Transmitters - Subaru 2007 B9 Tribeca Owner's Manual

crease. Replace the battery as soon as
possible.
To replace the battery:
1. Open the transmitter case using a flat-
head screwdriver.
2. Remove the old battery from the hold-
er.
0
1) Negative (–) side facing up
200715
3. Replace with a new battery (Type
CR2025 or equivalent) making sure to in-
stall the new battery with the negative (–)
side facing up.
4. Refit the removed half of the transmit-
ter case.
After the battery is replaced, the trans-
mitter must be synchronized with the
keyless entry system's control unit.
Press either the "
six times to synchronize the unit.

Replacing lost transmitters

If you lose a transmitter or want to pur-
200716
chase additional transmitters (up to four
can be programmed), you should re-pro-
gram all of your transmitters for security
reasons. It is recommended that you have
your dealer program all of your transmit-
ters into your system.
Programming the transmitters
1
The keyless entry system is equipped with
a special code learning feature that allows
you to program new transmitter codes into
the system or to delete old ones. The sys-
tem can learn up to four unique transmitter
codes. The four transmitter codes may be
the same or different.
200717
Programming transmitter codes into
system:
" or " " button
Bag containing transmitter
2-11
Keys and doors
200718
– CONTINUED –