Light Control Switch; Headlights; High/Low Beam Change (Dimmer) - Subaru 2007 B9 Tribeca Owner's Manual

3-26
Instruments and controls
turned to the "START" position.
The journey time indication flashes each
time a complete hour has elapsed. If the
display is giving an indication other than
the journey time, the display switches to
the journey time, flashes for five seconds,
and returns to its original indication each
time a complete hour has elapsed.
NOTE
The journey time is reset when the igni-
tion switch is turned to the "OFF" posi-
tion. It is also reset if the ignition
switch is turned to the "LOCK" or
"ACC" position prior to restarting of
the engine.

Light control switch

To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the "ON" position. In any other posi-
tion, the vehicle's lights will be out.
If you park your vehicle on a road-
side at night, use the hazard warn-
300563
ing flasher to alert the other drivers.
The light switch operates only when the
ignition switch is in the "ON" position.

Headlights

To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Parking lights, instrument panel illumina-
tion, tail lights and license plate light are
on.
second position
Headlights, parking lights, instrument pan-
el illumination, tail lights, and license plate
light are on.
High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light "
300506
300507
" on the instru-