To Install The Cover Housing; Convenient Tie-Down Hooks - Subaru 2007 B9 Tribeca Owner's Manual

6-14
Interior equipment

To install the cover housing

1. Remove the cover at the cover housing
retaining part using a flat-head screwdriv-
er.
2. Pull either sleeve on the end of the cov-
er housing to shorten the cover's length.
3. Insert the projections located on the
both ends of the sleeve into the recesses
of the retainers.
600603
600604

Convenient tie-down hooks

The convenient tie-down hooks are
designed only for securing light car-
go. Never try to secure cargo that
exceeds the capacity of the hooks.
The maximum load capacity is 44
lbs (20 kg) per hook.
The cargo area is equipped with four tie-
down hooks so that cargo can be secured
with a luggage net or ropes.
When using the tie-down hooks, turn them
down out of the storing recesses. When
not in use, put the hooks up into the stor-
ing recesses.
600428