Connectivity Cards - Invacare LiNX DLX-REM500 User Manual

Seating Function Inhibits
• Tilt limit
The maximum tilt limit switch is a function to prevent
the seat tilt or recline from extending beyond a
maximum pre-set angle, when the seat lifter is raised
above a certain point. The drive electronics stops
automatically, a grey exclamation point is displayed
on the seating card and tilting or reclining backwards
is inhibited A.
According to that, an icon with a seat and an
exclamation point is displayed in the status bar. This
indicator remains active until the tilt limit is deactivated
by lowering the lifter.
1637425-I
Fig. 5-90
Fig. 5-91
• Lifter seat lockout
The drive electronics is equipped with a sensor to
prevent the seat lifter from rising up above a certain
point when the seat tilt or recline is adjusted above a
certain point. The drive electronics stops automatically,
a grey exclamation point is displayed on the seating
card and extend is inhibited A.
According to that, an icon with a seat and an
exclamation point is displayed in the status bar. This
indicator remains active until the lifter seat lockout is
deactivated by moving seat tilt or recline up.

5.19 Connectivity Cards

Connectivity cards allow you to communicate with external
devices. Connectivity functions supported by your remote
are a mouse mover and a switch control. By default, these
Fig. 5-92
Fig. 5-93
Usage
73