Invacare® LiNX
5.3 The horn
Press the horn button A to sound the horn. The horn
sounds for as long as the horn button is pressed.
The horn button is also used for unlocking a locked system.
Refer to 5.4 Locking/unlocking the remote, page 20.
5.4 Locking/unlocking the remote
By default, lock function is disabled. Contact your provider
to change the configuration.
If function is enabled, the system can be locked / unlocked
using below described sequence.
20
Locking the remote
1. Press ON/OFF button A for more than four seconds
when remote is powered up.
When entering the locked state, the battery gauge indicates
the transition by flashing LEDs red, amber and green (far
left, middle and far right) three times.
1602969-F