Instructions Specific To Hazardous Area Installation - Siemens SITRANS LR260 Operating Instructions Manual

5.3.1

Instructions specific to hazardous area installation

Device nameplate (ATEX/IECEX/INMETRO/C-TICK)
SITRANS LR260
7MLxxxx-xxxxx-xxxx
Serial No: GYZ / B1034567
Encl.: NEMA / TYPE 4X, 6, IP67, IP68
Amb.Temp.: – 40°C to 80°C
Power Rating: 24V
The ATEX certificates listed on the nameplates can be downloaded from the product page
(www.siemens.com/sitranslr260). Go to Support > Approvals / Certificates.
The IECEx certificates listed on the nameplates can be viewed on the IECEx website
iecex.iec.ch). Go to: http://iecex.iec.ch (http://iecex.iec.ch)and click on Ex Equipment
Certificates of Conformity then enter the certificate number IECEx SIR 11.0153X or IECEx SIR
07.0090X.
Device nameplate (FM/CSA)
FM/CSA Intrinsically Safe connection drawing number A5E03745229 can be downloaded from
the product page of our website at: www.siemens.com/LR260. Go to Technical info > Images,
graphics and drawings
For power demands see Startup Behavior (Page 162).
● For wiring requirements: follow local regulations.
● Approved dust-tight and water-tight conduit seals are required for outdoor Type 4X 6, IP67,
IP68 locations.
● Refer to Instructions specific to hazardous area installations (Page 40)
Note
Selecting a suitable PLC input module, power supply, or barrier requires knowledge about
Intrinsic Safety and the application. It is the responsibility of the installer to ensure that the
intrinsically safe installation complies with both the apparatus approval requirements and the
relevant national code of practice.
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD
KCC-REM-S49
SITRANSLR
Nom., 30 V Max., 4 - 20mA HART
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic and imported parts
5.3 Hazardous area installation
II 1 D,1/2 D, 2 D
Ex ta IIIC T100°C Da
SIRA 07ATEX9256X
IECEx SIR 07.0090X OCP 0017
Ex ta IIIC T100 °C Da
DNV 12.0081 X
WARNING: Use Cable Rated >100°C
ATENÇÃO - RISCO POTENCIAL DE CARGA ELETROSTÁTICA – VEJA INSTRUÇÕES
- UTILIZAR CABOS ADEQUADOS PARA TEMPERATURAS >100 °C
Connecting
0518
0891
(http://
41