Local Commissioning; Power Up; Activating The Radar Device; Handheld Programmer Functions - Siemens SITRANS LR260 Operating Instructions Manual

Commissioning

6.2 Local commissioning

6.2 Local commissioning
The handheld programmer used with this device contains lithium batteries that are non-
replaceable.
Lithium batteries are primary power sources with high energy content designed to provide the
highest possible degree of safety.
Potential hazard
Lithium batteries may present a potential hazard if they are abused electrically or
mechanically. Observe the following precautions when handling and using lithium batteries:
● Do not short-circuit, recharge or connect with false polarity.
● Do not expose to temperatures beyond the specified temperature range.
● Do not incinerate.
● Do not crush, puncture or open cells or disassemble.
● Do not weld or solder to the battery's body.
● Do not expose contents to water.
6.2.1

Power up

6.2.1.1

Activating the radar device

Power up the device. A transition screen showing first the Siemens logo and then the current
firmware revision is displayed while the first measurement is being processed. The first time the
device is configured, you will be prompted to select a language (English, German, French, or
Spanish). To change the language again, see Language (7.).
Press Mode
6.2.2

Handheld programmer functions

6.2.2.1

Handheld programmer functions overview

The radar device carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the Local User Interface (LUI) which
consists of an LCD display and a handheld programmer.
A Quick Start Wizard provides an easy step-by-step procedure to configure the device for a
simple application. Access the wizards:
46
WARNING
to toggle between Measurement and Program mode.
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD