Parameter reference
8.5 Setup (2.)
8.5.3
Loader Revision (LOADER REV.) (2.1.2.)
Corresponds to the software used to update the SITRANS LR260. Read only.
8.5.4
Hardware Revision (HARDWARE REV.) (2.1.3.)
Corresponds to the electronics hardware of the SITRANS LR260. Read only.
8.5.5
Input (2.2.)
8.5.6
Sensor Calibration (SENSOR CALIB.) (2.2.1.)
You can configure each of the related parameters, to suit your particular application.
8.5.7
Antenna (2.2.1.1.)
Sets antenna type.
8.5.8
Sensor Units (2.2.1.4.)
Units the sensor is measuring in.
78
Values (view only)
Values
No Horn, Horn 2, Horn 3, Horn 4
Default is set by factory depending on horn size.
M, CM, MM, FT, IN
Default: M
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD