Changing The Fuses Of Individual Electrical Power Consumers - KTM Freeride E-XC 2021 Owner's Manual

16 ELECTRICAL SYSTEM
16.4
100
F03140-10

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses for the individual power consumers is located under the seat, behind
the 12-V battery.
Main work
–
Check the battery voltage.
» Battery voltage: < 9 V
–
Do not charge the 12-V battery.
–
Replace the 12-V battery and dispose of the old 12-V
battery properly.
» If the specifications have been met:
Battery voltage: ≥ 9 V
–
Connect a battery charger to the 12-V battery. Switch
on the battery charger.
Guideline
The charging current, charging voltage, and charging
time must not be exceeded.
Maximum charging volt-
age
Maximum charging cur-
rent
Maximum charging time
Recharge the 12-V bat-
tery regularly when the
motorcycle is not being
used
Battery charger (58429074000)
These battery chargers test whether the 12-V battery
retains its voltage. It is also impossible to overcharge
the 12-V battery with these battery chargers. The
charging time may be longer at low temperatures.
These battery chargers are only suitable for lithium iron
phosphate batteries. Read the accompanying KTM Pow-
erParts instructions.
Info
Never remove cover
Finishing work
–
Install the 12-V battery.
–
Lock the seat. ( p. 69)
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the Powerpack HV. (
–
Mount the protection cap. (
14.4 V
3.0 A
24 h
6 months
1
.
( p. 98)
p. 43)
p. 108)
p. 71)