Changing The Combination Instrument Battery - KTM Freeride E-XC 2021 Owner's Manual

16 ELECTRICAL SYSTEM
16.11
106

Changing the combination instrument battery

F02494-10
F02495-10
F02496-10
–
1
Tighten screw .
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the Powerpack HV. (
–
Mount the protection cap. (
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws .
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing
outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Guideline
Screw, combination
instrument on com-
bination instrument
bracket
Finishing work
–
Install the headlight mask with the headlight. (
–
Install the Powerpack HV. (
–
Lock the seat. ( p. 69)
–
Check the headlight setting. (
–
Set the kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. ( p. 29)
p. 43)
p. 108)
p. 71)
p. 102)
2
all the way counterclock-
3
.
p. 139)
and turn all the way clockwise
EJOT DELTA PT
1 Nm (0.7 lbf ft)
® 45x12-Z
p. 102)
p. 109)
p. 105)
p. 27)
p. 28)