Checking The Front Brake Linings - KTM Freeride E-XC 2021 Owner's Manual

14 BRAKE SYSTEM
14.6
82
F03130-10

Checking the front brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
F03131-10
Main work
–
Move the brake fluid reservoir attached to the right of the han-
dlebar to a horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
A
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
Finishing work
–
Install the Powerpack HV. (
–
Lock the seat. ( p. 69)
–
Check the brake linings for lining thickness
A
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
( p. 83)
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the brake linings of the front brake.
( p. 83)
3
.
.
5 mm (0.2 in)
p. 143)
p. 109)
A
.
≥ 1 mm (≥ 0.04 in)