KTM Freeride E-XC 2021 Owner's Manual page 137

Faults
Blink code 45 on the vehicle
Blink code 46 on the vehicle
Blink code 51 on the vehicle
Blink code 52 on the vehicle
Blink code 53 on the vehicle
Blink code 54 on the vehicle
Speedometer values deleted
(time, stop watch, lap times)
The high beam, low beam,
position light, tail light, and
license plate lamp are not
working
The combination instrument,
horn, brake light, and turn sig-
nal are not working
Possible cause
Fault in the electric motor
Error in the vehicle system
wiring harness or in a switch
Electric motor control unit error
Fault in the moisture monitor
Error in the relay of the
Powerpack HV
Fault in the insulation monitor
The combination instrument
battery is empty
Fuse 3 blown
Fuse 4 blown
TROUBLESHOOTING 23
Action
–
Switch the main switch off and on.
–
Switch the main switch off and on.
–
Check the vehicle system wiring har-
ness and plug-in connectors for exter-
nal damage.
–
Switch the main switch off and on.
–
Switch the main switch off and on.
–
Switch the main switch off and on.
–
Clean and dry the discharge plug and
discharge socket without compressed
air.
–
Change combination instrument bat-
tery. ( p. 106)
–
Change the fuses of individual electri-
cal power consumers. (
–
Change the fuses of individual electri-
cal power consumers. (
p. 100)
p. 100)
135