Table of Contents
Advertisement
Note: The cabling for Model 170 is the same as Model 250. Use these instructions to cable a Model 170.
v Model 270
v Model 700
Note: Model 6xx is no longer supported.
v Model 800, 810
v Model 820
v Model 825
v Model 830, 840
Note: The Operations Console cable should be installed by your service provider for these servers.
v Model 870, 890
Note: The Operations Console cable should be installed by your service provider for these servers.
Configure Operations Console on the PC
|
When you have completed your Operations Console planning and your Set up Operations Console
|
|
checklist, you are ready to begin the Operations Console configuration wizard.
|
Note: You must have Administrator rights to create or alter a configuration.
|
To access the wizard:
1. Click Start.
|
2. Select Programs.
|
3. Select iSeries Access for Windows.
|
|
4. Select Operations Console.
Note: If Operations Console did not appear, you need to complete an iSeries Access for Windows
|
|
selective setup. Click Start —> Programs —> IBM iSeries Access for Windows —> Selective
|
Setup.
|
The configuration wizard and Operations Console window starts. Step through the wizard and enter any
required data. Click Finish to save the configuration and exit the configuration wizard. It is important
|
that each configured connection has a unique name or unpredictable results may occur.
|
Note: The configuration wizard automatically configures the connection to use the console and remote
|
control panel for some configurations. If you do not want to use one of these functions use the
|
|
connection's Properties --> Configuration tab to deselect the function you do not want started for
this connection.
|
|
Highlight the connection name then use one of these methods to start your connection.
1. Right-click the connection name and select Connect.
|
2. Click the connection icon in the toolbar.
|
3. Click the connection drop-down and select Connect.
|
Note: The server needs to be powered on for the console to connect.
|
|
View the online help associated with using Operations Console by selecting Help from the Operations
Console window Help menu.
|
45
Operations Console
Advertisement
Table of Contents
