Table of Contents
Advertisement
3. If your PC has power management capabilities, it could turn the PC off. The PC may reset the
communications port when power management is started, which would end any connections already
established. Certain types of power management on the PC and in the operating system may cause
system reference code (SRC) 0000DDDD to appear in the iSeries control panel or remote control panel.
This SRC data should clear when PC activity resumes.
If you want to use an Operations Console local console on a network (LAN), you need to install the LAN
|
|
adapter for Operations Console according to your iSeries model. IBM supports a local console on a
network (LAN) only on Models 270 and 8xx. Table 2 shows the supported cards for LAN connectivity.
|
Table 3 shows the correct location for the LAN card.
|
Note: Supported cards and locations are only for non-partitioned servers or primary partitions. For
|
|
logical partitions in an LPAR environment, any Operations Console supported adapter can be
|
used. For example, a tower containing a SPD-bus would support a 2699 adapter.
Important: If an emergency arises where your LAN connection fails, you should configure an Operations
Console local console directly attached to the server. See Planning for your backup console. Table 3 also
shows the correct location for the directly cabled console.
Table 2. Supported cards for LAN connectivity
Card name or number
2744
2838
2849
Integrated Ethernet Port
Note: The Integrated Ethernet Port is the only LAN-connectivity for the Operations Console local console on a
network option for model 825.
Table 3. iSeries requirements - LAN card location
Model
170, 250
720
730, 740
270
800, 810
820
825
830, SB2
840, SB3
870, 890
Note: (1)These locations will only be available if the Integrated Ethernet Port is not operational.
To review cable requirements, see Meet Operations Console cable requirements.
18
iSeries: iSeries Access for Windows Operations Console
Description
PCI 100 Mbps Tokenring Adapter
PCI 100/10 Mbps Ethernet IOA
PCI 100/10 Mbps Ethernet IOA
PCI 100/10 Mbps Integrated LAN IOA (model 825 only)
LAN console card location
not supported
not supported
not supported
C06, second C05
C06, second C05
C04, second C03, third C11
Integrated Ethernet Port, (C03, C02,
C01)(1)
C04, second C06, third C10
C04, second C06, third C10
C04, C06, C07, C08, C09
Operations Console async card
location for the cable
C08
C09
See the Cabling information.
C07
C07
C06
C06
C02
C02
C02
Advertisement
Table of Contents
