IBM eServer iSeries Manual page 43

1. Click Start —> Settings —> Control Panel.
2. Double-click Phone and Modem Options and click on the Modem tab to display the Install New
Modem panel. If you have other modems installed, the Modems Properties panel will display, and
you need to click Add.
3. Select Don't detect my modem; I will select it from a list.
4. Click Next.
5. Click Have Disk...
Note: If you know the full path to the Operations Console Connection driver (cwbopaoc.inf), enter it
here. Then, go to step 7. If you do not know the path, continue with step 6.
6. Click Browse...
Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is the drive where iSeries
Access for Windows is installed.
Note: The default install path is: C:\Program Files\Ibm\Client Access\Aoc\Inf\cwbopaoc.inf
7. Click Open, then click OK.
8. Click Next.
9. Select the communications port where the Operations Console cable is attached, and click Next.
10. If prompted, select Continue Anyway to continue the installation.
11. Click Finish and then click OK.
Install PC modem
You need to install the PC modem on your PC.
Install PC modem for Windows NT
Use these instructions to install the PC Modem for Windows NT.
Install PC modem for Windows 2000
Use these instructions to install the PC Modem for Windows 2000.
Install PC modem for Windows XP
Use these instructions to install the PC Modem for Windows XP.
Install PC modem for Windows NT: If you are installing a PC modem that requires specific drivers, use
the instructions that the modem manufacturer provides. Otherwise, follow these steps to install the PC
modem:
1. Click Start —> Settings —> Control Panel —> Modems.
2. If you are currently in the Modems Properties window click Add, and then Next. Otherwise, if you
are at the Install New Modem window, click Next. The PC should find the new modem and report its
location.
3. When the window shows the modem it found, click Next to accept it. The PC will now load the
driver code to support it.
4. Click Finish to return you to the Modems Properties window.
5. Close the Modems Properties window.
Note: You must add and configure this modem in Remote Access Service before the modem can be
used by Operations Console.
Install PC modem for Windows 2000: If you are installing a PC modem that requires specific drivers,
use the instructions that the modem manufacturer provides. Otherwise, follow these steps to install the
PC modem:
1. Click Start —> Settings —> Control Panel —> Phone and Modem Options.
37
Operations Console