Table of Contents
Advertisement
3. Select Don't detect my modem; I will select it from a list, then click Next.
4. Click Have Disk...
5. Click Browse...
6. Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is the drive where iSeries
Access for Windows is installed.
Note: The default installation path C:\Program Files\Ibm\Client Access\Aoc\Inf\cwbopaoc.inf.
7. Click Open, then click OK.
8. Select the communications port where you are going to install the Operations Console cable (for
example, COM1).
9. Click Next.
10. Click Finish.
11. Click OK.
Install AS/400 Operations Console Connection Modem for Windows 2000: You must install the
Operations Console connection modem that is shipped with Operations Console in order for a local
console to communicate with the server. Only use these instructions if you are configuring a local console
directly attached to the server or a local console directly attached to the server with remote access
allowed.
To install:
1. Click Start —> Settings —> Control Panel.
2. Click Phone and Modem Options.
3. Click the Modems tab.
4. Click Add.
5. Select Don't detect my modem; I will select it from a list, and then click Next.
6. Click Have Disk...
Note: If you know the full path to the Operations Console Connection driver (cwbopaoc.inf), enter it
here. Then, go to step 8. If you do not know the path, continue with step 7.
7. Click Browse...
Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is the drive where iSeries
Access for Windows is installed.
Note: The default installation path C:\Program Files\Ibm\Client Access\Aoc\Inf\cwbopaoc.inf.f)
Click Open.
8. Click OK. Operations Console Connection should be listed.
9. Click Next.
10. Select the communications port where you are going to install the Operations Console cable (for
example, COM1).
11. Click Next.
12. If the Digital Signature Not Found window appears, click Yes.
13. Click Finish. You should be back in the Modems tab of the Phone and Modem Options folder.
14. Click OK.
Install AS/400 Operations Console Connection Modem for Windows XP: You must install the
Operations Console connection modem that is shipped with Operations Console in order for a local
console to communicate with the server. Only use these instructions if you are configuring a local console
directly attached to the server or a local console directly attached to the server with remote access
allowed.
To install:
36
iSeries: iSeries Access for Windows Operations Console
Advertisement
Table of Contents
