IBM eServer iSeries Manual page 115

Access for windows operations console
Hide thumbs Also See for eServer iSeries:
Table of Contents

Advertisement

v iSeries Access for Windows
Use this information to install and configure iSeries Access for Windows on both the iSeries server and
the PC. Installation and configuration is necessary on both the server and the PC.
v Control panel
Operate the system by directly manipulating the control panel or using APIs in your programs. You
can use the control panel to power on or off the system, perform an initial program load (IPL), or
determine processor activity.
v Logical partitions
Logical partitions allow you to distribute resources within a single iSeries server to make it operate as
if it were two or more independent servers.
v Upgrades
Use the information in this topic to upgrade hardware features, upgrade to a different iSeries server
model, or upgrade to a more current release of the OS/400 operating system. During an upgrade, the
source server and the target server keep the same serial number.
v Migration
Use the information in this topic to migrate data from one iSeries server or partition to another iSeries
server or partition. When performing a data migration, the source server and the target server must
have different serial numbers.
v Plan for hardware and software
Good planning is essential for the successful setup and use of your server. It ensures that you have
everything you need and meet all prerequisites. The planning information in this topic helps you place
the server, plan power needs, print any special cabling or setup instructions, meet any PC
requirements, and prepare for unique configurations based on how you will use the server (for
example, clustering of servers, Internet connections, and rack mounting).
v Cabling instructions
Cabling instructions are available to print for your server.
Saving PDF files
To save a PDF on your workstation for viewing or printing:
1. Right-click the PDF in your browser (right-click the link above).
2. Click Save Target As... if you are using Internet Explorer. Click Save Link As... if you are using
Netscape Communicator.
3. Navigate to the directory in which you would like to save the PDF.
4. Click Save.
Downloading Adobe Acrobat Reader
You need Adobe Acrobat Reader to view or print these PDFs. You can download a copy from the Adobe
Web site (www.adobe.com/products/acrobat/readstep.html)
.
Operations Console
109

Advertisement

Table of Contents
loading

Table of Contents