Table of Contents
Advertisement
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Confirm installation of TCP/IP on the PC.
®
__ 9. Install AS/400
__ 10. Install or configure Remote Access Service.
__ 11. Install Microsoft service pack.
__ 12. Install Operations Console cables.
__ 13. Configure Operations Console on the PC.
Complete prerequisite checklist for Windows 2000: Local console directly attached to the server:
Complete the following checklist to set up a local console directly attached to the server on Windows
2000:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Install AS/400Operations Console Connection Modem.
__ 9. Install Operations Console cables.
__ 10. Configure Operations Console on the PC.
Complete prerequisite checklist for Windows XP: Local console directly attached to the server:
Complete the following checklist to set up a local console directly attached to the server on Windows XP:
__ 1. Meet Operations Console hardware requirements.
__ 2. Meet Operations Console software requirements.
__ 3. Meet Operations Console cable requirements.
__ 4. Verify available communications port.
__ 5. Run prerequisite checking program on the PC.
__ 6. Install iSeries Access for Windows.
__ 7. Apply iSeries Access for Windows service packs.
__ 8. Install AS/400 Operations Console Connection Modem.
__ 9. Install Operations Console cables.
__ 10. Configure Operations Console on the PC.
Set up a local console directly attached to the server with remote access allowed
There are unique setup prerequisites depending on the operating system you are using. Select the
operating system on which you are installing Operations Console:
Complete prerequisite checklist for Windows NT
Complete the prerequisite checklist for a local console directly attached to the server with remote
access allowed running Windows NT.
Operations Console Connection Modem.
29
Operations Console
Advertisement
Table of Contents
