Using Setup
RS232
Select RS232 from the SETTINGS Menu and proceed as follows.
Note: Use of the RS232 communications interface is only permitted in a SAFE area.
The settings shown above are the default settings.
Powerdown
Select Powerdown from the SETUP menu and proceed as follows.
If TIMER mode is selected, following a period of inactivity, the instrument will
automatically power off after the preset TIMER period.
If OFF is selected, auto power off is inhibited and once switched on, the instrument
will remain ON until it is manually switched OFF.
Calibration
Calibration routines are password protected. Refer to Calibration Section, Page 40
for details of use.
K249 Issue No. 4
38