Recalling Data Files - GE Druck DPI 610 IS User Manual

Memory Operations

Recalling Data Files

Data or results files generated by running procedures are stored in the
instrument's datalog directory. To recall a data file to the display, make sure that
DATALOG is selected from the SETUP menu and proceed as follows (e.g.),
Use the cursor keys to select either the AS FOUND option or the AS LEFT option for
display. AS FOUND is the result of the first run of a procedure and AS LEFT is the
result of the last time the procedure was run.
Procedure data files can be displayed either as text (stored screens) or in graphical
form. To display as text , select the TEXT option (F1) from the directory and
proceed as follows from the File Summary menu. Select Auto Step (F1) to
automatically review each screen at 1 second intervals or use the left and right
cursor keys to manually review.
To transmit the selected logged data via the RS232 interface, connect the
instrument to a free port on an external PC, make sure that the instrument's RS232
parameters match those of the PC.
To display logged data in graphical form, on screen, select GRAPH (F2) from the
directory and proceed as follows (e.g),
35
Datalog
K249 Issue No. 4