Memory Operations
Uploading Datalog Files
THE RS232 INTERFACE MUST ONLY BE USED IN A SAFE AREA
Connect the RS232 socket of the instrument into either the COM1 or COM2 port of
the PC. Ensure that the RS232 parameters at the PC end match those of the
instrument. The RS232 parameters of the instrument can be checked as detailed
on page 38. Set up a file on the PC to receive the data, (e.g.) in the Windows
Terminal program.
To upload a file, proceed as follows. Appendix 1 give details of a typical uploaded
datalog file.
Delete Datalog and Procedure Files
To delete a datalog file, or a procedure file, proceed as follows. Alternatively, to
delete all logged files simultaneously, select ERASE ALL FILES (F2) at the erase
screen.
K249 Issue No. 4
WARNING
32
Datalog