Using Setup; Store Mode; Contrast; Settings - Select Setup Option - GE Druck DPI 610 IS User Manual

Using Setup

General
SETUP mode is available in all modes except BASIC. It permits the set-up of the
following instrument parameters.
• Store Mode - None, Snapshot, Datalog.
•

Contrast.

• Instrument Settings - Units, Language, RS232 parameters,
Powerdown, and Calibration Routines (Refer to page 40 for
Calibration details).
•

Date and Time (Real Time clock).

Store Mode

Select STORE MODE from the SETUP menu and select required mode as follows.
Contrast
Select CONTRAST from the SETUP menu and proceed as follows.

Settings - Select Setup Option

To select one of the SETTINGS options from the SETUP menu, proceed as follows.
K249 Issue No. 4
36