GE Druck DPI 610 IS User Manual page 10

The manufacturer has designed this equipment to be safe when operated using
the procedures detailed in this manual. Do not use this equipment for any other
purpose than that stated.
This publication contains operating and safety instructions that must be followed
to ensure safe operation and to maintain the equipment in a safe condition. The
safety instructions are either warnings or cautions issued to protect the user and
the equipment from injury or damage.
Use suitably qualified * technicians and good engineering practice for all
procedures in this publication.
Pressure
Do not apply pressures greater than the safe working pressure to the equipment.
Toxic Materials
There are no known toxic materials used in construction of this equipment.
Maintenance
The equipment must be maintained using the procedures in this publication.
Further manufacturer's procedures should be carried out by authorized service
agents or the manufacturer's service departments.
Approved Service Agents
Technical Advice
For technical advice contact the manufacturer.
* A qualif ied technician must have the necessary technical knowledge,
documentation, special test equipment and tools to carry out the required
work on this equipment.
This equipment meets the requirements of all relevant European
safety directives. The equipment carries the CE mark.
This symbol, on the instrument, indicates that the user should refer
to the user manual. This symbol, in this manual, indicates a
hazardous operation.
K249 Issue No. 4
Safety
www.gesensing.com
iv