Min/Max Process Function; Filter Process Function - GE Druck DPI 610 IS User Manual

Advanced Task

Min/Max Process Function

•
To set-up an input display to show min/max and present measurand
reading, enable MIN/MAX from the process menu and press F1 (SETTINGS)
to provide RESET function. The display is now reconfigured to show the
max/min values as follows (e.g.),

Filter Process Function

•
To apply the low pass filter to a selected measurand, enable FILTER from
the process menu and press F1 (SETTINGS) to provide access to the filter
parameters. Two settings are required, Time to Settle and Band.
To examine the current filter settings and exit without change, press the
EXIT key.
The set-up procedure is as follows.
K249 Issue No. 4
Reset Max/Min display at any time by pressing the
F1 key.
To quit max/min, press INPUT, select MAX/MIN
from process menu and switch the function off.
22
Process Functions