Loading Paper Into Tray 2, Tray 3, Tray 4, Or Tray 5 (Optional) - Konica Minolta bizhub 306 Quick Manual

2

Loading paper into Tray 2, Tray 3, Tray 4, or Tray 5 (optional)

1
Pull out the tray.
% Press the lifter plate down until it "clicks" into position.
1 Lifter plate
2
Slide the lateral guide to fit to the groove according to the paper size.
3
Set the paper and slide the lateral guide to fit to the paper edge.
% Load the paper so that the side on which you want to print is facing up.
% Be sure to load the paper below the tab, so that the stack height does not exceed the , mark.
% Up to 250 sheets of plain paper can be loaded.
% Special paper (thick paper, OHP transparencies, or envelopes) cannot be loaded.
d
Reference
For details on how to load paper into Tray 2, Tray 3, Tray 4, or Tray 5, refer to Chapter 3 of the [User's Guide
Copy].
2-14
Loading paper
1
bizhub 306/266
2.7