Saving Paper Used For Copying; 2-Sided Copying - Konica Minolta bizhub 306 Quick Manual

3.3

Saving paper used for copying

3.3 Saving paper used for copying
This section describes procedures for printing on both sides of paper (2-sided copying) and for printing mul-
tiple reduced pages onto a single sheet (combined copying).

2-sided copying

When copying a large number of 1-sided originals, copying them onto both sides of each sheet reduces the
amount of paper used by 50%.
1
Press the Copy key and load the original.
% For details on how to load the original, refer to page 2-11.
2
Configure the settings for 2-sided copying.
% Use the +/, key to select [1-SIDE % 2-SIDE], and press the OK key.
% When you select [1-SIDE % 2-SIDE] and press the ) key, you can specify the binding position for
the printed sheets.
Tips
For [1-SIDE % 2-SIDE], [1-SIDE] refers to a 1-sided original, and [2-SIDE] refers to a 2-sided copy.
3
Use the Keypad to specify the number of copies, then press the Start key.
% To interrupt the copy operation being performed, press the Clear/Stop key. For details, refer to
page 3-10.
% When you have loaded the original onto the Original Glass, go to Step 4.
4
When a message appears, load the next original then press the OK key.
5
When all originals have been scanned, press the Start key.
Tips
The number of scanned pages is displayed under the number of copies.
bizhub 306/266
SIMPLEX/DUPLEX
OUTPUT BINDING POS.
1
PAPER: LTRw
ZOOM : 100%
NEXT PAGE?
SCAN=OK (PRN=START)
1-SIDE>1-SIDE
1-SIDE>2-SIDE
2-SIDE>1-SIDE
3
3-5