Scanning Using A Wia Driver - Konica Minolta bizhub 306 Quick Manual

6
6.6

Scanning using a WIA driver

Scanning is enabled using an application that supports WIA.
The operation method differs depending on the application to be used.
1
Load the original.
% For details on how to load the original, refer to page 2-11.
2
Start the image processing application on the computer side.
3
Configure the scanning settings.
% For details on settings, refer to [User's Guide Scan].
4
Click [Scan].
Scanning starts.
6-14
Scanning using a WIA driver
bizhub 306/266
6.6