When Using Tray 1 - Konica Minolta bizhub 306 Quick Manual

5
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Click [OK].

When using Tray 1

1
Load paper.
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y)
using the Original Scale.
2
Configure the settings for the custom sized paper.
TRAY1
PAPER SIZE
PAPER TYPE
TRAY1 PAPER SIZE
X=210(140-432)
Y=130( 90-297)
Input=10key (Fin.=OK)
TRAY1 PAPER TYPE
PLAIN
RECYCLE
1-SIDE
SPECIAL
% Use the +/, key to select the correct setting, then press the OK key. (1)(2)(3)(4)(7)(8)(9)
% Use the Keypad to enter the paper size, then press the OK key. (5)(6)
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y)
using the Original Scale.
5-10
Printing on custom sized paper
X
Y
UTLITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
DRUM DEHUMIDIFY
TRAY1 PAPER SIZE
SIZE INPUT
MEMORY1:[432/297]
MEMORY2:[140/ 90]
PAPER SOURCE SETUP
TRAY1
TRAY2
TRAY3
TRAY4
PAPER SOURCE SETUP
TRAY1
TRAY2
TRAY3
TRAY4
TRAY1 PAPER SIZE
X=210(140-432)
Y=297( 90-297)
Input=10key (Fin.=OK)
TRAY 1
PAPER SIZE
PAPER TYPE
bizhub 306/266
5.5