Printing On Custom Sized Paper; When Using The Bypass Tray - Konica Minolta bizhub 306 Quick Manual

5.5

Printing on custom sized paper

5.5 Printing on custom sized paper
When printing on custom sized paper, load the paper into the Bypass Tray or Tray 1.

When using the Bypass Tray

1
Load paper.
% When the paper is loaded, a screen for specifying the paper in the Bypass Tray appears on the
Control Panel. Go to Step 2 to configure the settings for the custom sized paper.
2
Configure the settings for the custom sized paper.
BYPASS PAPER SETTING
SIZE:LTRv
TYPE:PLAIN
RETURN
PAPER SETTING
BYPASS PAPER SIZE
X=150(140-432)
Y=200( 90-297)
Input=10key (Fin.=OK)
% Use the +/, key to select [SIZE], then press the ) key. (1)
% Use the +/, key to select the correct setting, then press the OK key. (2)(6)
% Use the Keypad to enter the paper size, then press the OK key. (3)(4)
% Use the +/, key to select [TYPE], then press the ) key. (5)
% Press the Back key to return to the basic screen.
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y)
using the Original Scale.
bizhub 306/266
Y
X
BYPASS PAPER SIZE
SIZE INPUT
MEMORY1:[432/297]
MEMORY1:[140/ 90]
BYPASS PAPER SETTING
SIZE:[150/200]
TYPE:PLAIN
RETURN
TYPE SETTING
BYPASS PAPER SIZE
X=150(140-432)
Y= 90( 90-297)
Input=10key (Fin.=OK)
TYPE SETTING
PLAIN
RECYCLE
1-SIDE
SPECIAL
5
5-7