Sending A Fax To Multiple Destinations At The Same Time; Sequential Broadcast Transmission - Konica Minolta bizhub 306 Quick Manual

4.2

Sending a fax to multiple destinations at the same time

4.2 Sending a fax to multiple destinations at the same time

Sequential broadcast transmission

The original can be sent to multiple destinations by one operation. This function is referred to as a sequential
broadcast transmission.
You can specify multiple destinations using two methods. One is to enter the destinations using the Keypad,
and the other is to select them from those registered. You can combine these two methods.
1
Press the Fax key and load the original.
% For details on how to load the original, refer to page 2-11.
2
Specify the destinations.
BROADCAST
ADD
CHECK/EDIT
RETURN
% Use the +/, key to select [BROADCAST], then press the OK key. (1)
% Specify a destination, then press the OK key. (2)
% Use the +/, key to select [ADD], then press the OK key. (3)
% Repeat Steps (1) to (3) to specify all destinations.
% When you have specified all destinations, select [RETURN] then press the OK key. (4)
% To check the destinations, select [CHECK/EDIT].
3
Configure the other necessary settings then press the Start key.
% When you have loaded the original onto the Original Glass, specify the scanning size. For details,
refer to page 4-3.
% To interrupt the transmission, press the Clear/Stop key and select [YES] in the displayed screen.
For details, refer to page 4-11.
bizhub 306/266
FAX FUNCTION
BROADCAST
MAILBOX TX
PRINT MAILBOX RX
POLLING TX
BROADCAST
ADD
CHECK/EDIT
RETURN
BROADCAST
DESTINATION
4
4-5