Removing A Paper Jam In The Main Unit, Bypass Tray, Or Tray1 - Konica Minolta bizhub 306 Quick Manual

2.8 Removing a jam

Removing a paper jam in the main unit, Bypass Tray, or Tray1

The following describes the procedure for removing a paper jam in the main unit, Bypass Tray, or Tray 1.
Tips
- Areas around the fusing unit are hot. To prevent burns, do not touch any parts other than those speci-
fied in the procedure. If you touch a hot component, immediately cool the skin with cool water and con-
sult a physician.
-
Touching the surface of the transfer roller can deteriorate the image quality of copies. Be careful not to
touch the surface of the transfer roller with your hand.
-
When releasing the pressure-bonding lever, hold the green part of the lever.
-
Touching the surface of the PC drum can deteriorate the image quality of copies. Be careful not to touch
the surface of the PC drum with your hand.
7CAUTION
- The inside of this product has areas subject to high temperature, which may cause burns. When check-
ing the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around
the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
bizhub 306/266
2
2-17