Printing On Envelopes; When Using The Bypass Tray - Konica Minolta bizhub 306 Quick Manual

5.6

Printing on envelopes

% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Click [OK].
5.6 Printing on envelopes
To print on envelopes, you need to specify the size and type of paper in Control Panel and select the enve-
lope size in the data to be printed or in the printer driver.

When using the Bypass Tray

1
Load envelopes.
% Load the envelopes with the flap side facing up.
% Up to 10 envelopes can be loaded.
% When the paper is loaded, a screen for specifying the paper in the Bypass Tray appears on the
Control Panel. Go to Step 2 to configure the settings for the envelopes.
2
Configure the settings for the envelopes.
BYPASS PAPER SETTING
SIZE:LTRv
TYPE:PLAIN
RETURN
PAPER SETTING
BYPASS PAPER SIZE
X=241(140-432)
Y=105( 90-297)
Input=10key (Fin.=OK)
% Use the +/, key to select [SIZE], then press the ) key. (1)
% Use the +/, key to select the correct setting, then press the OK key. (2)
% Use the Keypad to enter the paper size, then press the OK key. (3)(4)
% Use the +/, key to select [TYPE], then select the ) key. (5)
% Select [ENVELOPE]. (6)
% Press the Back key to return to the basic screen.
% If you are not sure about the size of the envelopes, measure the length (X) and width (Y) using the
Original Scale.
bizhub 306/266
BYPASS PAPER SIZE
SIZE INPUT
MEMORY1:[432/297]
MEMORY1:[140/ 90]
BYPASS PAPER SETTING
SIZE:[241/105]
TYPE:PLAIN
RETURN
TYPE SETTING
BYPASS PAPER SIZE
X=241(140-432)
Y=297( 90-297)
Input=10key (Fin.=OK)
TYPE SETTING
TRANSPARENCE
CARD1
CARD2
ENVELOPE
5
5-13