Copying An Original - Konica Minolta bizhub 306 Quick Manual

3.1

Copying an original

3 Using as a Copy Machine
3.1 Copying an original
This section describes basic procedures for loading and copying an original.
1
Press the Copy key and load the original.
% For details on how to load the original, refer to page 2-11.
2
Specify the image quality.
% Use the +/, key to select the correct setting, then press the OK key.
% For originals containing both text and a photo, select [TEXT/PHOTO].
% For originals containing only text, select [TEXT].
% For originals containing only photos, select [PHOTO].
3
Specify the density.
% Use the +/, key to select the correct setting, then press the OK key.
% When you select [MANUAL], use the */) key to select the appropriate density, then press the OK
key.
% In manual setting, you can select the density from nine different levels.
% You cannot specify the automatic density control and the [PHOTO] image quality setting at the same
time.
4
Use the Keypad to specify the number of copies, then press the Start key.
% When you load the original onto the Original Glass, repeat Steps 1 to 4.
% To interrupt the copy operation being performed, press the Clear/Stop key. For details, refer to
page 3-10.
bizhub 306/266
QUALITY(ORIGINAL)
TEXT/PHOTO
TEXT
PHOTO
DENSITY(TEXT/PHOTO)
AUTO
MANUAL
DENSITY(TEXT/PHOTO)
AUTO
MANUAL
3
3-3