Konica Minolta bizhub 306 Quick Manual page 108

6
6
Press the Speed Dial key. Enter a 3-digit dial number using the Keypad, then press the OK key.
% Before sending data to the server, register the FTP/SMB server address using a number between
[251 and 300] on the speed dial.
% You can select an address using AddressBook key. For details, refer to Chapter 5 of the [User's
Guide Scan].
% The file format and compression coding method can be specified. For details, refer to Chapter 6 of
the [User's Guide Scan].
7
Press the Start key.
% To interrupt the transmission, press the Clear/Stop key then select [YES] in the displayed screen.
For details, refer to page 6-10.
% When you have loaded the original onto the Original Glass, go to Step 8.
8
Use the +/, key to select [AUTO DETECTION] or [MANUAL], then press the OK key.
% When you select [MANUAL], you can specify the scanning size.
9
To start scanning, press the OK key.
10
When continuously scanning the original, load the next original, then press the OK key.
11
When scanning of all originals has been completed, press the Start key.
% To interrupt the transmission, press the Clear/Stop key and select [YES] in the displayed screen.
For details, refer to page 6-10.
6-6
BOOK SCAN
AUTO DETECTION
MANUAL: LTRv
Sending scanned data
bizhub 306/266
6.1