Table of Contents
Advertisement
Chapter 3 Setting Monitor
3-1. Adjusting Volume
●
To turn the volume up/down
This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1. Press
Note
• Alternatively, you can use
• The volume setting is common for the HDMI input and stereo mini jack.
Attention
• If a speaker with built-in amplifier is attached to the line output connector, adjust the volume on the external speaker.
You cannot adjust the volume using the remote control or control buttons on the monitor.
• When you try to adjust the volume with all the conditions below, "This operation is not available on current status." is
displayed.
- The headphones are not connected.
- A speaker with built-in amplifier is attached to the line output connector.
●
To mute the sound temporarily
Procedure
1. Press
on the remote control.
Mute sound temporarily.
By pressing the button again or pressing
Note
• The mute setting can also be released by pressing
• While the monitor is muted, press
Attention
• If a speaker with built-in amplifier is attached to the line output connector, adjust the volume on the external speaker.
You cannot adjust the volume using the remote control of the monitor.
• When you try to mute the speaker with all the conditions below, "This operation is not available on current status" is
displayed.
- The headphones are not connected.
- A speaker with built-in amplifier is attached to the line output connector.
28
Chapter3SettingMonitor
or
on the remote control.
or
on the monitor for adjustment (see
or
"1-2. Controls and Functions" (page
, the sound comes back.
on the monitor.
on the monitor to decrease the volume setting.
8)).
Advertisement
Table of Contents
