Chapter 3 Setting Monitor; Enabling/Disabling Mode Selection [Mode Preset]; Locking Buttons [Key Lock] - Eizo RadiForce MX220W Instructions For Use Manual

Chapter 3 Setting Monitor

3-1. Enabling/Disabling Mode Selection [Mode Preset]

Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
1. Choose <Tools> from the Adjustment menu, and press
2. Choose <Mode Preset> from the <Tools> menu, and press
3. Select the mode to change its settings with
4. Select "On" or "Off" with
5. Press
Attention
• You cannot set all the modes disable. Set at least one mode to "On".

3-2. Locking Buttons [Key Lock]

This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1. Press
2. Press
The Optional Settings menu appears.
3. Choose <Key Lock> from the <Optional Settings> menu, and press
4. Select "Off", "Menu", or "All" with
Settings
Off
(Initial settings)
Menu
All
5. Select "Finish" with
6. Press
The Optional Settings menu is closed.
or
to exit the adjustment.
to turn off the monitor.
holding down for at least 2 seconds to turn on the monitor.
Buttons that can be locked
None (All buttons are enabled)
button
button
All buttons excluding
or .
to exit.
.
or , and press
.
or , and press .
.
.
.
Chapter 3 Setting Monitor
25