Chapter 3 Setting Monitor
3-1. Setting Orientation
The display direction of the image can be changed according to your environment.
Attention
• Refer to the User's Manual of the graphics board.
• The setting is available even when the PC is not started up.
• The setting is not available when "PinP" is selected from "Optional Settings" – "Display Setup".
●
Single
Procedure
1. Press
to turn off the monitor.
2. Hold down
The "Optional Settings" menu appears.
3. Select "Signal Selection" from "Optional Settings", and press
4. Select "Orientation", and press
5. Select "Landscape", "Portrait(SW)", or "Portrait(HW)" with
Landscape
Selectedforhorizontalinstallation.
Portrait(SW)
Selectedforverticalinstallation.Thedisplayimageisturnedby90˚using
theutilitysoftwareofthegraphicsboard.
Portrait(HW)
Selectedforverticalinstallation.Thedisplayimageisturnedby90˚using
themonitorfunction.
6. Press
7. Select "Finish" with
8. Press
.
The "Optional Settings" menu is closed.
while pressing
for at least two seconds to turn on the monitor.
.
Monitor orientation
to exit.
or .
.
or , and press
.
Display example
A
A
A
Chapter3SettingMonitor
27