Chapter 3 Setting The Monitor; Switching Among Input Signals; Setting Input Signal Switching Procedure - Eizo Radiforce GX550 Installation Manual

Chapter 3 Setting the Monitor

3-1. Switching among Input Signals

Procedure
1. Select "Preferences" of the Adjustment menu, and choose
2. Select "Input" from "Preferences", and choose
3. Using or
4. Select after completing the setting.
The selected input port name is displayed.

3-2. Setting Input Signal Switching Procedure

Setting
On
Off
Procedure
1. Select "Preferences" of the Adjustment menu, and choose
2. Select "Auto Input Detection" from "Preferences", and choose
3. Select "On" or "Off" with
4. Select after completing the setting.
Note
• When the main power supply is turned on or off, signals are automatically detected irrespective of the setting
of this function.
, select either "DVI" or "DisplayPort".
The monitor recognizes the connector through which signals are input. When a PC is
turned off or enters power saving mode, the monitor automatically displays another signal.
The monitor displays the signal from the connector currently selected whether or not
signals are input. In this case, select the input signal to be displayed by referring to
Switching among Input Signals" (page
or .
.
.
Function
9).
.
.
Chapter 3 Setting the Monitor
"3-1.
9