Chapter  Setting Monitor; Enabling/Disabling Mode Selection [Mode Preset]; Locking Switches [Key Lock] - Eizo RADIFORCE RX220 User Manual

Chapter  Setting Monitor

-1. Enabling/Disabling Mode Selection [Mode Preset]

Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
1. Choose <Tools> from the Adjustment menu, and press
2. Choose <Mode Preset> from the <Tools> menu, and press
Select the mode to change its settings with
3.
Select "On" or "Off" with
4.
5. Press
Attention
You cannot set all the modes disable. Set at least one mode to "On".
•

-. Locking Switches [Key Lock]

This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1. Press
2. Press
The Optional Settings menu appears.
3. Choose <Key Lock> from the <Optional Settings> menu, and press
Select "Off", "Menu", or "All" with
4.
Settings
Off
(Initial settings)
Menu
All
Select "Finish" with
5.
6.
Press
The Optional Settings menu is closed.
or
to exit the adjustment.
to turn off the monitor.
down for at least 2 seconds to turn on the monitor.
holding
Switches that can be locked
None (All switches are enabled)
switch
switch
All switchs excluding
or .
to exit.
.
or , and press
.
or , and press .
.
.
.
Chapter 3 Setting Monitor
1