Table of Contents
Advertisement
To set "Smart Detection"
Setting
Video
FullScreen
Procedure
1. Press
on the remote control.
The "Smart Functions" menu appears.
2. Select "Smart Detection", and press
The "Smart Detection" menu appears.
3. Select "Video" or "Full Screen" with
4. Press
to exit.
Note
• Under the following conditions, the setting for "Smart Detection" is fixed to "Full Screen".
- At analog signal input
- At interlace signal input
• "Full Screen" should be set to display animated images using the whole screen.
To set "Smart Resolution"
Adjustable range
1 - 5, Off
Procedure
1. Press
on the remote control.
The "Smart Functions" menu appears.
2. Select "Smart Resolution" with
The "Smart Resolution" menu appears.
3. Set the correction level with
4. To complete the setting, proceed to step 7.
To continuously set "Skin Tone Enhancer" and "Text Enhancer", proceed to step 5.
5. Choose the item to correct, and press
Each setting menu appears.
6. Select "Enable" or "Disable" with
7. Press
to exit.
Attention
• When "Smart Resolution" is set to "Off", "Skin Tone Enhancer" and "Text Enhancer" cannot be selected.
• "Text Enhancer" is enabled only when all the conditions below are met.
- At digital signal input
- At non-interlace signal input
- The screen is not enlarged using the Screen Size function (see
34
Chapter4UsingSmartFunction
Detectstheanimatedimagesonthescreen,andappliesthesettingonlytothe
detectedarea.
Appliesthesettingtothewholescreen.
.
or
.
, and press
or
.
.
or
.
Function
.
"2-5. Screen Size Changing" (page
26)).
Advertisement
Table of Contents
