Setting Power Indicator; Enabling/Disabling Automatic Brightness Adjustment "Auto Ecoview; Reducing Glare "Ecoview Optimizer - Eizo DuraVision FDF2303W User Manual

5-2. Setting Power Indicator

This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Power Indicator" in the "Monitor Settings" menu, and press
The "Power Indicator" menu appears.
3. Select "Enable" or "Disable" with
4. Press to exit the adjustment.
5-3. Enabling/Disabling Automatic Brightness
Adjustment "Auto EcoView"
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press
2. Choose "Auto EcoView" in the "EcoView Menu" menu, and press
The "Auto EcoView" menu appears.
3. Select "High", "Standard", or "Off" with
4. Press to exit.
Note
• As "Brightness" in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
• Set to "High" if you feel a little brighter with "Standard" setting status.

5-4. Reducing Glare "EcoView Optimizer"

Using EcoView Optimizer adjusts the screen brightness according to the environment brightness and white level of
the input signal. Using this function with Auto EcoView can create a more comfortable level of brightness and
reduce glare.
Procedure
1. Press
2. Choose "EcoView Optimizer" in the "EcoView Menu" menu, and press .
The "EcoView Optimizer" menu appears.
3. Select "On" or "Off" with
4. Press to exit.
Attention
• Be careful not to block the ambient light sensor on the lower side of the monitor when using the EcoView Optimizer
function.
38
Chapter5PowerSavingFunctions
or
on the remote control.
on the remote control.
or .
.
.
or .
.
.