Eizo DuraVision FDF2303W User Manual page 35

To set "Smart Insight"
Adjustable range
1 - 5, Off
Procedure
1. Press on the remote control.
The "Smart Functions" menu appears.
2. Select "Smart Insight" with
The "Smart Insight" menu appears.
3. Set the correction level with
4. Press to exit.
To check the setting status
The setting status of the "Smart Functions" menu can be checked on the demo screen.
Switching to the demo mode
1. Press or for 2 seconds or more while the "Smart Functions" menu is displayed.
The screen is switched to the demo mode.
- Left half of screen: The settings of the "Smart Functions" menu are applied.
- Right half of screen: The settings of the "Smart Functions" menu are not applied.
Note
• During the demo mode, the "Smart Functions" menu can be displayed to change each setting. If any of the
, , and
• When "Smart Detection" is set to "On", the magenta colored frame that covers the area detected as an animated image
appears.
• To return to normal display from the demo screen, press
menu is displayed.
, and press
or .
buttons is pressed, the menu appears.
.
or for 2 seconds or more while the "Smart Functions"
Chapter4UsingSmartFunction
,
35